Resin Bound Stone
BIF - EXP Resin Bound
RonaDeck Resin Bound Surfacing is a resin bound aggregate surface for pedestrian and vehicular traffic. RonaDeck Resin Bound surfaces are decorative and functional, seamless and slightly flexible.
RonaDeck Resin Bound Surfacing is designed for foot traffic and occasional vehicle traffic such as on domestic driveways, residential developments with light domestic traffic or car parking bays.
Tough & durable, the system uses a specially graded natural aggregates (recycled aggregate available) to provide high wear resistance.
The system is designed to allow fast drainage of surfaces water and is a low maintenance and very attractive external finish for domestic and commercial exteriors.
Colour Range
Terracotta Snow
Terracotta Medium
Terracotta Gold
Terracotta 10mm
Silver Moon
Silver Granite 10mm
Rustic Bronze
Rouge
Rouge Blanc
Riverbed
Rhine Gold 10mm
Quartz Parallel
Night Sky
Midnight
Lunar
Maple Glow
Harvest Crunch
Dorset Gold 10mm
Dalmatian
Aztec Gold
Autumn Forest
Argent Rouge
System Structure
The open matrix allows water to drain through to the base, eliminating water ponding and allowing water to drain to planted areas or land drains. The surfacing may be applied to SuDS compliant bases and sub-bases, reducing the impact of urban development on flood risk and allowing water to flow into water courses.
Edgings created from brick, stone, timber or steel should be installed to retain and protect the resin bound surfacing.
RonaDeck Resin Bound Surfacing is a two component polyurethane resin which binds a range of selected decorative kiln-dried aggregates. RonaDeck Resin Bound Surfacing provides an attractive porous surface which is strong enough for foot and light vehicle traffic
It is however, not a road surface for heavy volumes of domestic or commercial traffic. Heavier vehicle traffic, including heavy impact and high point loading will damage the surface and may result in failure.
Due to the destructive scuffing forces created by power steering (e.g. three point turns) in car parks or on driveways where cars will repeatedly turn within a confined area, localised wear is more likely. It is therefore recommended that when the product is used in such locations, the surface is regularly inspected by the client and maintained as required.
Product Summary
• 38% of resin formulated from a botanic source
• UV stable non yellowing resin
• product warranty up to 15 years available
• natural appearance
• recycled aggregates available
• SuDS compliant
• highly permeable—up to 850 litres / m² / minute
• high slip resistance
• suitable for pool surrounds, paths, drives, car parks & access roads
• low maintenance
• variety of colours
