BIF Services Limited
Resin Flooring Expertise
Know us from projects we've completed
Below are a few examples of our projects.
Together they demonstrate that we hold a wide range of capabilities installing industrial floor and wall finishes to very high standards, but we're also able to adapt industrial systems to work extremely well in Commercial or Public Space Contracts.
We're very different to many resin flooring contractors and many of the projects completed below involved complex but very necessary concrete repair or reconstruction work before any resin could be applied.
LAID TO LAST is something we take care to achieve, providing knowledge, skill, experience & care to our customers year after year.
BIF repaired this old 1300m2 industrial unit which had a highly worn & uneven floor. Our engineered repairs included crack repair work & regulating levels.
We then applied a 4mm crack bridging, semi-flexible Polyurethane screed.
Floor levelling was accomplished by applying multiple fibre reinforced regulating layers to build up floor levels.
We then applied a 4mm crack bridging, semi-flexible Polyurethane screed.
Floor levelling was accomplished by applying multiple fibre reinforced regulating layers to build up floor levels.
Over 50 years of heavy traffic & chemical attack had finally worn this floor out.
BIF uplifted sections of the floor, installed new fibre reinforced base screeds & installed 9mm of Heavy Duty Polyurethane Screed.
The work was completed over 9 phases.
BIF uplifted sections of the floor, installed new fibre reinforced base screeds & installed 9mm of Heavy Duty Polyurethane Screed.
The work was completed over 9 phases.
BIF completed this very significant project, within a live food factory.
The work involved removal & reinstatement of 120,000kg of old screeds with new fibre reinforced screeds & 9mm thick polyurethane screed.
Over 1000m2 preparation of walls & ceilings; applying hygienic wall coatings & installation of over 100lin m of Stainless Steel Drainage components.
The project completed on time and on budget.
The work involved removal & reinstatement of 120,000kg of old screeds with new fibre reinforced screeds & 9mm thick polyurethane screed.
Over 1000m2 preparation of walls & ceilings; applying hygienic wall coatings & installation of over 100lin m of Stainless Steel Drainage components.
The project completed on time and on budget.
Let down by both a contractor & manufacturer, a leading food technology research company asked BIF to correct a poor quality floor & wall finish installation.
Our work involved removal & reinstatement of a defective resin screed, tidying multiple poor detailing issues & returning the installation as a high quality finish, within a tight timeframe.
The project completed on time & to a very respectable standard.
Our work involved removal & reinstatement of a defective resin screed, tidying multiple poor detailing issues & returning the installation as a high quality finish, within a tight timeframe.
The project completed on time & to a very respectable standard.
Installation of fibre reinforced Quartz Epoxy Screeds within a Shared Services HQ building, involving a Police Custody Suite & Fire, Police & Ambulance Appliance Bay.
The 460m2 project was completed in 2 phases, on time & defect free.
The 460m2 project was completed in 2 phases, on time & defect free.
Extensive repairs were necessary on failing floor & wall surfaces within a Custody Suite.
After submitting detailed proposals to repair defects, BIF agreed a phased Programme of works to undertake crack repairs to an underfloor heated floor screed & then reinstate new resin floor and wall finishes.
Many of the techniques used were unique and they allowed for continued movement of the structure, without impeding on the safety or appearance of floor & walls.
After submitting detailed proposals to repair defects, BIF agreed a phased Programme of works to undertake crack repairs to an underfloor heated floor screed & then reinstate new resin floor and wall finishes.
Many of the techniques used were unique and they allowed for continued movement of the structure, without impeding on the safety or appearance of floor & walls.
BIF installed over 1500m2 of fibre reinforced epoxy resin screeds in an Agricultural Production Building which required stringent hygiene standards.
Our work involved crack repairs to the existing concrete floors & installing Stainless Steel Drainage. The project completed on time & on budget.
Our work involved crack repairs to the existing concrete floors & installing Stainless Steel Drainage. The project completed on time & on budget.
BIF installed 350m2 of underfloor heated, fibre reinforced screed in this prestigious home.
The floor then received a 6mm thick cushioned layer before we applied a 4mm flexible polyurethane finish, sealed with a satin sealer.
The floor is performing beautifully and is easy to clean & is both warm & comfortable underfoot.
The floor then received a 6mm thick cushioned layer before we applied a 4mm flexible polyurethane finish, sealed with a satin sealer.
The floor is performing beautifully and is easy to clean & is both warm & comfortable underfoot.
After 2650m2 of recently laid concrete started to delaminate, BIF were called in to advise.
We removed the defective surface, levelled the surface with epoxy regulating layers (0-8mm thick) & installed a 4mm thick epoxy screed to reinstate designed floor tolerances.
The project completed on time and continues to provide a hard wearin surface for this leading glazing manufacturer.
We removed the defective surface, levelled the surface with epoxy regulating layers (0-8mm thick) & installed a 4mm thick epoxy screed to reinstate designed floor tolerances.
The project completed on time and continues to provide a hard wearin surface for this leading glazing manufacturer.
BIF complete whatever our customers need; from basic floor sealing works, right up to providing high specification resin flooring in advanced engineering centres.
In this instance, a high specification anti-static resin screed was required for an assembly area within an Aerospace Factory.
As part of our scope, BIF then employed a qualified specialist to carry out electrical resistivity testing before handing the conformity certificate to the client on completion.
In this instance, a high specification anti-static resin screed was required for an assembly area within an Aerospace Factory.
As part of our scope, BIF then employed a qualified specialist to carry out electrical resistivity testing before handing the conformity certificate to the client on completion.
BIF are specialists in providing safe, durable resin finishes. We’ve been closely involved with installing safe floor & wall finishes in Seclusion Rooms for over 20 years and this year we completed a further 19 Seclusion/Ensuite Secure Rooms across various sites, all using our BIF-EP-Quartz system to both floor & wall surfaces.
Fibre reinforced layers provide durability, but the real benefit is the consistency of surface finish we’re able to achieve. 6 years warranty provided too.
Fibre reinforced layers provide durability, but the real benefit is the consistency of surface finish we’re able to achieve. 6 years warranty provided too.
BIF installed over 1500m2 PVCu Hygienic Wall Cladding to a major new Car Dealership's Service, Body Shop & Valeting departments.
15 years after installing most of the factory flooring, BIF were called back in to replace a smooth self levelling screed, with a slip resistant version in their Goods-In Area.
BIF applied BIF-EP-Grip-Eco at a nominl 3mm thickness, applied to a fibre reinforced regulation layer.
The project completed on time and for the agreed cost.
BIF applied BIF-EP-Grip-Eco at a nominl 3mm thickness, applied to a fibre reinforced regulation layer.
The project completed on time and for the agreed cost.
We corrected several level issues on the new concrete surface to achieve consistent edges along Duct Covers cast into the floor on this project.
The 680m2 area then received a fibre reinforced regulation layer before BIF-EP-Quartz Eco was applied to leave a decorative, smooth surface finish in this high-tech manufacturing showroom.
The 680m2 area then received a fibre reinforced regulation layer before BIF-EP-Quartz Eco was applied to leave a decorative, smooth surface finish in this high-tech manufacturing showroom.
BIF successfully completed the removal of a failed paint coating to the underside of a food process hall for a good customer of ours.
To achieve this, we had our team trained & we hired Dry Ice Blasting equipment to reach even the toughest areas of this 450m2 process area.
The work, which involved working at a height of 5m was supervised throughout by our management team and accessed by a combination of scaffold & powered access equipment.
We completed on time, with all coating removed.
To achieve this, we had our team trained & we hired Dry Ice Blasting equipment to reach even the toughest areas of this 450m2 process area.
The work, which involved working at a height of 5m was supervised throughout by our management team and accessed by a combination of scaffold & powered access equipment.
We completed on time, with all coating removed.
Our first significant step into a new industry.
1000m2 of fibre reinforced resin screed installed in a mjor internal salads production facility.
1000m2 of fibre reinforced resin screed installed in a mjor internal salads production facility.
Our work within the Mental Healthcare Sector continued this year with commencing work on 24 Ensuite Shower Rooms in a high security hospital.
The work required our team to work within a live wing, removing failing wall renders and floor screed and installing new Quartz Resin floor and walls surfaces.
The project was completed in 24 phases, using the same team members, who worked with care & sensitivity; a credit to our company in every respect.
The work required our team to work within a live wing, removing failing wall renders and floor screed and installing new Quartz Resin floor and walls surfaces.
The project was completed in 24 phases, using the same team members, who worked with care & sensitivity; a credit to our company in every respect.
BIF completed a significant Hygienic Wall Cladding installation as part of the construction of a major Car Dealership.
Over 1500m2 of internal cladding was installed to workshop, staircase & service areas, ensuring walls could be cleaned down and would not need regular redecoration. The project was completed on time and at an agreed cost with many variations to the original scope.
Over 1500m2 of internal cladding was installed to workshop, staircase & service areas, ensuring walls could be cleaned down and would not need regular redecoration. The project was completed on time and at an agreed cost with many variations to the original scope.
We applied high build resin coatings to form walkways throughout an Aerospace factory over weekends.
Our teams can complete large areas quickly and by working over weekends, using fast cure coatings,we'll not get in the way of your production.
Our teams can complete large areas quickly and by working over weekends, using fast cure coatings,we'll not get in the way of your production.
We uplifted 250m2 of old ceramic floor tiles in a 1st Floor production area, installed a new fast cure screed and installed Stainless Steel Drainage Channels. A 9mm thick Polyurethane screed was applied with formed resin coves.
Police Custody Suites have proved problematic. Inexperienced contractors, poor detailing & site conditions have led to failures that the main contractor on this project wanted to avoid.
BIF proposed our resin system as a direct alternative to the specified system. We installed one room & gave the Architects the choice on which system should be adopted. They chose BIF-EP-Quartz.
We then agreed strict site conditions & Programme & completed the installation on time & to the approval of all.
BIF proposed our resin system as a direct alternative to the specified system. We installed one room & gave the Architects the choice on which system should be adopted. They chose BIF-EP-Quartz.
We then agreed strict site conditions & Programme & completed the installation on time & to the approval of all.
BIF also install external landscaping resin systems and this project involved 900m2 of Resin Bonded Stone installed over a new Tarmac base. We worked very closely with the main contractor to regulate the levels across the apron, to avoid ponding water & we were praised for the attention to detail our team took on this prestigious project.
BIF secured an important project to install Quartz Resin Screeds inside a new Research Centre.
Both standard and Anti-Static versions were installed and the project, which was delayed due to issues beyond our control, ws completed for the areed tendered cost and to a very high standard.
A further project was secured with the same client later that year.
Both standard and Anti-Static versions were installed and the project, which was delayed due to issues beyond our control, ws completed for the areed tendered cost and to a very high standard.
A further project was secured with the same client later that year.
Our EP-Flow coloured epoxy screed provided an ideal floor finish for this Cider Brewery.